Manual lathe CA6166

The structural stiffness and transmission stiffness of the machine tool are higher than those of ordinary lathes, with high power utilization rate, suitable for strong and high belt cutting. The spindle has a large aperture and can be equipped with complete accessories.

Contact us by Email :dehaimachine@163.com

Description

Manual lathe CA6166

Feature : ◆The CA6161 This series of lathes is suitable for turning inner and outer cylindrical surfaces, conical surfaces, and other rotating surfaces, and can perform drilling and oil groove pulling work. The bed is wider than a regular lathe and has a higher stiffness. The guide rail surface has been quenched in the middle class and is durable and wear-resistant. The machine tool operation is flexible and centralized, and the slide plate is equipped with a quick moving mechanism. Adopting a single handle for visual operation, with good user friendliness.

TypeCA6140 CA6140BCA6150 CA6150B CA6150CCA6161 CA6161B CA6161CCA6166 CA6166B CA6166CCA6180 CA6180B CA6180C
CA6240 CA6240BCA6250 CA6250B CA6250CCA6261 CA6261B CA6261CCA6266 CA6266B CA6266CCA6280 CA6280B CA6280C
Max. swing over bed400mm500mm610mm660mm800mm
Max. swing over carriage210mm300mm370mm400mm540mm
Max. swing in gap (CA62 series) 630mm720mm830mm880mm1020mm
Max. effective length in gap (CA62 Series)210mm
Max. length of workpiece750/1000/1500/2000/2200/3000/4000mm
Width of bed400mm
Section of turning tool25×25 mm
Main spindle motor7.5kw(10HP)
Spindle
Spindle speed16--1400rpm(24step)
Spindle bore52mm (B:80mm),(C:105mm)
Spindle taperNo.6(MT6)(Φ90 1:20)[Φ113:20]
Feed
NO. of feed(64 kinds)(for each)
Range of metric threads(1-192mm) (44 kinds)
Range of inch threads(2-24tpi) (21kinds)
Range of module threads0.25-48 (module 39 kinds)
Range of diametral pitch threads1-96DP (37 kinds)
Max. tailstock spindle travel150mm
Tailstock spindle diameter75mm
Taper of tailstock spindle centre hole1-96DP (37 kinds)
Packing dimensions (L*W*H)
Overall dimensions for 750mm2550×1140×1750mm2550×1140×1750mm2550×1140×1750mm2550×1140×1750mm2550×1140×1750mm
Overall dimensions for 1000mm2700×1140×1750mm2700×1140×1750mm2700×1140×1750mm2700×1140×1750mm2700×1140×1750mm
Overall dimensions for 1500mm3200×1140×1750mm3200×1140×1750mm3200×1140×1750mm3200×1140×1750mm3200×1140×1750mm
Overall dimensions for 2000mm3700×1140×1750mm3700×1140×1750mm3700×1140×1750mm3700×1140×1750mm3700×1140×1750mm
Overall dimensions for 2200mm4030×1140×1750mm4030×1140×1750mm4030×1140×1750mm4030×1140×1750mm4030×1140×1750mm
Overall dimensions for 3000mm4850×1140×1750mm4850×1140×1750mm4850×1140×1750mm4850×1140×1750mm4850×1140×1750mm
Overall dimensions for 4000mm5800×1140×1750mm5800×1140×1750mm5800×1140×1750mm5800×1140×1750mm5800×1140×1750mm
Weight (kg)
Overall dimensions for 750mm2100 /19902170/20602300/21802380/22602520/2400
Overall dimensions for 1000mm2190/20702260/21402380/22502570/24502720/2560
Overall dimensions for 1500mm2350/22202450/22902577/24372810/26402980/2800
Overall dimensions for 2000mm2720/25702800/26402940/27873050/28803260/3087
Overall dimensions for 2200mm2800/26003940/27903120/29703390/31803490/3287
Overall dimensions for 3000mm3300/32003450/33003600/34503930/36874200/3887
Overall dimensions for 4000mm3500/34003750/36003950/38004580/42004850/4500
Features:
1. This series lathe machine is suitable for intemal and extemal turning,tapering,and other rotating faces, metric, module
and inch threads,as well as drilling and pull oil slot.
2. The lathe bed is 400mm,with high hardness on guideway,the guideway is through
3. This machine is easy to operate,with rapid device for carriage,design with single hand wheel to operate.
high-frequency quenching, wear-resisting.
4. The strength and rigidity of machine is higher than normal lathe machine,high efficiency,suitable for heavy duty
machining.