Manual lathe CA6240
◆The machine tool is inspected in strict accordance with the inspection procedures before leaving the factory, and a strong cutting test is done. The machine tool has good precision stability and processing reliability.
Description
Manual lathe CA6240
◆The bed of this series of lathes is wider than ordinary lathes, and the width of the guide rail is 400mm, which has high rigidity. The surface of the guide rail has been quenched by intermediate frequency, which is durable and wear-resistant. ◆The operation of the machine tool is flexible and centralized, and the sliding plate is equipped with a fast-moving mechanism. It adopts single-handle visual operation, which is pleasant. ◆The structural rigidity and transmission rigidity of the machine tool are higher than those of ordinary lathes, and the power utilization rate is high, which is suitable for strong cutting.
| Type | CA6240 CA6240B | CA6250 CA6250B CA6250C | CA6261 CA6261B CA6261C |
|---|---|---|---|
| Max. swing over bed | 400mm | 500mm | 610mm |
| Max. swing over carriage | 210mm | 300mm | 370mm |
| Max. swing in gap (CA62 series) | 630mm | 720mm | 830mm |
| Max. effective length in gap (CA62 Series) | 210mm | ||
| Max. length of workpiece | 750/1000/1500/2000/2200/3000/4000mm | ||
| Width of bed | 400mm | ||
| Section of turning tool | 25×25 mm | ||
| Main spindle motor | 7.5kw(10HP) | ||
| Spindle | |||
| Spindle speed | 16--1400rpm(24step) | ||
| Spindle bore | 52mm (B:80mm),(C:105mm) | ||
| Spindle taper | No.6(MT6)(Φ90 1:20)[Φ113:20] | ||
| Feed | |||
| NO. of feed | (64 kinds)(for each) | ||
| Range of metric threads | (1-192mm) (44 kinds) | ||
| Range of inch threads | (2-24tpi) (21kinds) | ||
| Range of module threads | 0.25-48 (module 39 kinds) | ||
| Range of diametral pitch threads | 1-96DP (37 kinds) | ||
| Tailstock | |||
| Max. tailstock spindle travel | 150mm | ||
| Tailstock spindle diameter | 75mm | ||
| Taper of tailstock spindle centre hole | 1-96DP (37 kinds) | ||
| Packing dimensions (L*W*H) | |||
| Overall dimensions for 750mm | 2550×1140×1750mm | 2550×1140×1750mm | 2550×1140×1750mm |
| Overall dimensions for 1000mm | 2700×1140×1750mm | 2700×1140×1750mm | 2700×1140×1750mm |
| Overall dimensions for 1500mm | 3200×1140×1750mm | 3200×1140×1750mm | 3200×1140×1750mm |
| Overall dimensions for 2000mm | 3700×1140×1750mm | 3700×1140×1750mm | 3700×1140×1750mm |
| Overall dimensions for 2200mm | 4030×1140×1750mm | 4030×1140×1750mm | 4030×1140×1750mm |
| Overall dimensions for 3000mm | 4850×1140×1750mm | 4850×1140×1750mm | 4850×1140×1750mm |
| Overall dimensions for 4000mm | 5800×1140×1750mm | 5800×1140×1750mm | 5800×1140×1750mm |
| Weight (kg) | |||
| Overall dimensions for 750mm | 2100 /1990 | 2170/2060 | 2300/2180 |
| Overall dimensions for 1000mm | 2190/2070 | 2260/2140 | 2380/2250 |
| Overall dimensions for 1500mm | 2350/2220 | 2450/2290 | 2577/2437 |
| Overall dimensions for 2000mm | 2720/2570 | 2800/2640 | 2940/2787 |
| Overall dimensions for 2200mm | 2800/2600 | 3940/2790 | 3120/2970 |
| Overall dimensions for 3000mm | 3300/3200 | 3450/3300 | 3600/3450 |
| Overall dimensions for 4000mm | 3500/3400 | 3750/3600 | 3950/3800 |
| Feature : | |||
| ◆The bed of this series of lathes is wider than ordinary lathes, and the width of the guide rail is 400mm, which has high rigidity. The surface of the guide rail has been quenched by intermediate frequency, which is durable and wear-resistant. | |||
| ◆The operation of the machine tool is flexible and centralized, and the sliding plate is equipped with a fast-moving mechanism. It adopts single-handle visual operation, which is pleasant. | |||
| ◆The structural rigidity and transmission rigidity of the machine tool are higher than those of ordinary lathes, and the power utilization rate is high, which is suitable for strong cutting. | |||
| ◆The machine tool is inspected in strict accordance with the inspection procedures before leaving the factory, and a strong cutting test is done. The machine tool has good precision stability and processing reliability. | |||
