Manual slotting machine B5020

Use hydraulic feed the slotting machine, Is when the work is over turning back instantaneous feed, Therefore be better than mechanical slotting machine used drum wheel feed.

Contact us by Email :dehaimachine@163.com

Category:

Description

Manual slotting machine B5020

slotting machine

1.The working table of the machine tool is provided with three different directions of feed (longitudinal, horizontal and rotary), therefore work object go through once clamping, Several surfaces in the machine tool machining

2.Hydraulic transmission mechanism with sliding pillow reciprocating motion and hydraulic feed device for working table.

3.The sliding pillow has the same speed in every stroke, and the movement speed of the ram and the working table can be adjusted continuously.

4.Hydraulic control table have ram commutation oil for oil reversing mechanism, In addition to hydraulic and manual feed outer, Even there single motor drive vertical, horizontal and rotary fast moving.

SpecificationUnitsB5020B5032B5040
Max.ram slotting lengthmm200320400
Ram moving frequency per minutetimes/min32-12520-8020-80
Ram title angle0-80-80-8
Ram vertical adjustment distancemm230315315
Distance from cutter head to column surfacemm485600600
Distance between ram lower end to table surfacemm320490690
Table diametermm500630630
Table longitudinal travelmm500630620
Table cross travelmm500560560
Table rotation angle360360360
Table feed range(longitudinal and cross)mm0.08-1.210.08-1.210.08-1.21
Table rotary feed rangemm0.052-0.7830.052-0.7830.052-0.783
Main motor powerkw344
Machine weightkg220030003700
Overall dimensionmm1916*1305*19952261*1495*22452290*1525*2485