Manual lathe CW61100
◆The machine tool is inspected in strict accordance with the inspection procedures before leaving the factory,and a strong cutting test is done. The machine tool has good precision stability and processing reliability.
Description
Manual lathe CW61100
Feature :
◆The CW61100 series lathe is suitable for turning internal and external cylindrical surfaces, conical surfaces, and other rotating parts. It can process various commonly used metric, inch, modulus, and diametral pitch threads, and can also broach oil grooves and keyways.
◆The bed of this series of lathes is wider than ordinary lathes, and the width of the guide rail is 600/755mm,
which has high rigidity. The surface of the guide rail has been quenched by intermediate frequency, which is durable and
wear-resistant.
which has high rigidity. The surface of the guide rail has been quenched by intermediate frequency, which is durable and
wear-resistant.
◆The operation of the machine tool is flexible and centralized, and the sliding plate is equipped with a
fast-moving mechanism. It adopts single-handle visual operation, which is pleasant.
fast-moving mechanism. It adopts single-handle visual operation, which is pleasant.
◆The structural rigidity and transmission rigidity of the machine tool are higher than those of ordinary lathes, and the power utilization rate is high, which is suitable for strong cutting.
| Specification | UNIT | CW61100 | CW61125B | CW61140B |
|---|---|---|---|---|
| Swing ove bed | mm | 1000 | 1250 | 1400 |
| Swingovwr cross slide | mm | 610 | 850 | 1000 |
| Distance between centers | mm | 1500/3000 | 1500/3000 | 1500/3000 |
| Guideway width | mm | 755 | 755 | 755 |
| Max.load capacity | T | 6 | 6 | 6 |
| Spindle bore | mm | 130 | 130 | 130 |
| Spindle bore taper | — | Metric φ140/MT6 | Metric φ140/MT6 | Metric φ140/MT6 |
| Spindle nose type | — | A2-15 | A2-15 | A2-15 |
| Spindle spesd steps | — | FWD.21 steps | FWD.21 steps | FWD.21 steps |
| Spindle speed range | rpm | 3.15-315 | 3.15-315 | 3.15-315 |
| Chuck | mm | 1000 4-jaw manual | 1000 4-jaw manual | 1000 4-jaw manual |
| Turret/tool post | — | Manual turret 4 position | Manual turret 4 position | Manual turret 4 position |
| Tool shank size | mm | 45×45 | 45×45 | 45×45 |
| Y axis travel | mm | 520 | 620 | 620 |
| Z axis travel | mm | 1350/2850 | 1350/2850 | 1350/2850 |
| X axis feed grade/range | mm/r | 56/0.05-6 | 56/0.05-6 | 56/0.05-6 |
| Z axis feed grade/range | mm/r | 56/0.1-12 | 56/0.1-12 | 56/0.1-12 |
| X axis rapid traverse | mm/min | 1870 | 1870 | 1870 |
| Z axis rapid traverse | mm/min | 3740 | 3740 | 3740 |
| Metric thread grade/range | mm | 44/1-120 | 44/1-120 | 44/1-120 |
| Inch thread grade/range | T.P.I | 31/28-3/8 | 31/28-3/8 | 31/28-3/8 |
| Module thread grade/range | mm | 45/0.5-60 | 45/0.5-60 | 45/0.5-60 |
| DP thread grade/range | D.P. | 30/56-1 | 30/56-1 | 30/56-1 |
| Teilstock quill diameter | mm | φ140 | φ140 | φ140 |
| Tailstosk quill taper | mm | MT6 | MT6 | MT6 |
| Tailstock quill travel | mm | 300 | 300 | 300 |
| Main sindle motor | kW | 22 | 22 | 22 |
| Rapid traverse motor | kW | 1.5 | 1.5 | 1.5 |
| Coolant pump motor | kW | 0.125 | 0.125 | 0.125 |
| Width x Height | mm | 2000×1800 | 2000×1950 | 2250×2050 |
| Length | mm | 4600/6100 | 4600/6100 | 4600/6100 |
| Net weight | T | 9.6/107 | 10.6/11.7 | 11.2/12.3 |
