Manual lathe CW61140

◆The machine tool is inspected in strict accordance with the inspection procedures before leaving the factory,and a strong cutting test is done. The machine tool has good precision stability and processing reliability.

Contact us by Email :dehaimachine@163.com

Description

Manual lathe CW61140

Feature : ◆CW series ordinary horizontal lathes are suitable for turning internal and external cylindrical surfaces, conical
surfaces and other rotating surfaces, turning various metric, inch, modulus and diametral pitch threads, and can perform drilling
and pulling oil grooves, etc. It is very versatile. The powerful horizontal lathe is widely used in batch processing of various
shaft and disk parts. ◆The bed of this series of lathes is wider than ordinary lathes, and the width of the guide rail is 600/755mm,
which has high rigidity. The surface of the guide rail has been quenched by intermediate frequency, which is durable and
wear-resistant. ◆The operation of the machine tool is flexible and centralized, and the sliding plate is equipped with a
fast-moving mechanism. It adopts single-handle visual operation, which is pleasant. ◆The structural rigidity and transmission
rigidity of the machine tool are higher than those of ordinary lathes, and the power utilization rate is high, which is suitable
for strong cutting.

SpecificationUNITCW61100CW61125BCW61140B
Swing ove bedmm100012501400
Swingovwr cross slidemm6108501000
Distance between centersmm1500/30001500/30001500/3000
Guideway widthmm755755755
Max.load capacityT666
Spindle boremm130130130
Spindle bore taperMetric φ140/MT6Metric φ140/MT6Metric φ140/MT6
Spindle nose typeA2-15A2-15A2-15
Spindle spesd stepsFWD.21 stepsFWD.21 stepsFWD.21 steps
Spindle speed rangerpm3.15-3153.15-3153.15-315
Chuckmm1000 4-jaw manual1000 4-jaw manual1000 4-jaw manual
Turret/tool postManual turret 4 positionManual turret 4 positionManual turret 4 position
Tool shank sizemm45×4545×4545×45
Y axis travelmm520620620
Z axis travelmm1350/28501350/28501350/2850
X axis feed grade/rangemm/r56/0.05-656/0.05-656/0.05-6
Z axis feed grade/rangemm/r56/0.1-1256/0.1-1256/0.1-12
X axis rapid traversemm/min187018701870
Z axis rapid traversemm/min374037403740
Metric thread grade/rangemm44/1-12044/1-12044/1-120
Inch thread grade/rangeT.P.I31/28-3/831/28-3/831/28-3/8
Module thread grade/rangemm45/0.5-6045/0.5-6045/0.5-60
DP thread grade/rangeD.P.30/56-130/56-130/56-1
Teilstock quill diametermmφ140φ140φ140
Tailstosk quill tapermmMT6MT6MT6
Tailstock quill travelmm300300300
Main sindle motorkW222222
Rapid traverse motorkW1.51.51.5
Coolant pump motorkW0.1250.1250.125
Width x Heightmm2000×18002000×19502250×2050
Lengthmm4600/61004600/61004600/6100
Net weightT9.6/10710.6/11.711.2/12.3