CNC Milling Machine XH7126

1. The main basic parts such as the base, slide, workbench, column, and lifting box are all made of HT300 cast iron; the base is a box structure, and the lifting box is a mobile board house.

The rationally structured rigid rib structure ensures the corresponding rigidity and bending and shock absorption performance of the basic parts; the grid-like rib structure inside the column effectively ensures the rigidity and precision of the strong rigidity of the Z axis; the basic parts are molded with resin sand and are treated with aging, which provides a guarantee for the stability of the machine tool for long-term use.

2. The X, Y, and Z cylinders are all made of plastic-coated aluminum alloy, which has the characteristics of high rigidity, low coefficient, low noise, and minimum rise and fall. With automatic forced lubrication, the machine tool accuracy and bearings are improved;

3. The Z direction adopts counterweight balance to ensure the smooth and stable movement of the headstock; the Z-direction drive motor is equipped with a power-off brake device;

4. The X, Y, and Z-direction feed adopts a high-strength internal circulation double-bolt pre-tightened large-lead ball screw with high feed; the drive motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the ball screw without gap, ensuring the positioning accuracy and synchronization of the machine tool;

5. The high-speed, load-bearing, and high-rigidity spindle unit is adopted, and the installation and bearing load-bearing capacity are strong, with a maximum of about 8000rpm;

6. The spindle and screw spindle protection devices in the three directions of X, Y, and Z are protected to ensure the cleanliness of the screw and spindle, and the transmission and movement accuracy of the machine tool and Service life;

7. The machine tool’s external protection adopts a full protection structure design, which is easy to operate, safe, reliable and beautiful;

8. A reliable centralized automatic lubrication device is used to perform timed, quantitative and automatic intermittent lubrication of each lubrication point of the machine tool, and the lubrication time can be adjusted according to the working conditions;

9. The machining center adopts 12 bamboo hats (standard configuration) produced by a professional manufacturer in Taiwan, which are accurate in tool change, short in time and high in efficiency. After millions of operation tests, it meets the reliability requirements; it has a structural structure that can reduce the impact of movement time and ensure the continuous existence of the tool magazine; pneumatic drive, easy to use, and the shortest tool change path;

10. A simple oil-water cooling separation device can separate most of the collected lubricating oil from the liquid to prevent the coolant from deteriorating quickly, which is beneficial to environmental protection;

11. The machine tool adopts the principle of ergonomics, and the operating box is independently designed, which can rotate by itself and is easy to operate.